Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TL062 |
Pin Count |
8 |
Operating Supply Voltage |
18V |
Number of Elements |
2 |
Power Supplies |
+-15V |
Operating Supply Current |
200μA |
Nominal Supply Current |
250μA |
Power Dissipation |
680mW |
Slew Rate |
3.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
30pA |
Voltage - Supply, Single/Dual (±) |
6V~36V ±3V~18V |
Output Current per Channel |
20mA |
Input Offset Voltage (Vos) |
6mV |
Bandwidth |
1MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
75.56dB |
Average Bias Current-Max (IIB) |
0.007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
3mV |
Low-Bias |
YES |
Micropower |
YES |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
TL062ACDT Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a J-FET-type. Linear amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 6mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 200μA . There should be no change in the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 18V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
TL062ACDT Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062ACDT Applications
There are a lot of STMicroelectronics TL062ACDT Instrumentational OP Amps applications.
- High gain DC amplifier
- Addition operation circuits
- Professional videography
- Television broadcasting equipment
- Micro signal measurement
- Broadcasting
- Division circuits
- Video data acquisition
- E-book readers
- High input resistance broadband