TL062ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL062 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 500μA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 75.56dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 6mV |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL062ACP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. An op amp ic of the J-FET type. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Op amp rates 3mV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 200μA . Op amp is a member of the 75.56dB's 75.56dB family. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
TL062ACP Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062ACP Applications
There are a lot of Texas Instruments TL062ACP Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- E-book readers
- Band-pass filter
- Television
- Digital cameras
- Communication
- Video data acquisition
- Oscilloscopes
- Signal amplification
- Biopotential
