TL062CDR
| Parameters | |
|---|---|
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 15mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL062 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 500μA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 75.56dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
TL062CDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are J-FET types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 15mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 200μA can be used to operate this linear amplifier. The voltage gain should stay at 75.56dB. As far as the device is concerned, buffer amplifier has 2 channels. This linear amplifier pack is based on the TR axis.
TL062CDR Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062CDR Applications
There are a lot of Texas Instruments TL062CDR Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Portable docking station
- Signal operation
- High gain DC amplifier
- Car stereo
- Video computer boards
- Television broadcasting equipment
- Power generator
- Communication device
- Active probe
