TL062IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TL062 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 680mW |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 75.56dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Height | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL062IDT Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the J-FET type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp rates 3mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~105°C , which is a good operating temperature. A supply current of 200μA can be used to operate this linear amplifier. Voltage gain should remain at 75.56dB. There are a total of 2 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
TL062IDT Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062IDT Applications
There are a lot of STMicroelectronics TL062IDT Instrumentational OP Amps applications.
- Car stereo
- Signal transformation
- Radiation thermometry transducers
- Medical imaging
- Digital cameras
- Thermocouples
- Portable media players
- Instrumentation
- Multiplication circuits
- Video data acquisition
