TL064BCNE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 1mA |
| Slew Rate | 3.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 200pA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 75.56dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL064BCNE4 Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 14 terminations. It consists of a total of 14 pins in total. This linear amplifier should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. Op amp rates 3mV as input offset voltage. It is possible to operate this buffer amplifier from a supply current of 200μA . The voltage gain should stay at 75.56dB. For this linear amplifier to work, the temperature should not be below 0°C. No temperature greater than 70°C should be used. 4 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.
TL064BCNE4 Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064BCNE4 Applications
There are a lot of Texas Instruments TL064BCNE4 Instrumentational OP Amps applications.
- Communication device
- Signal operation
- Proportional operation circuits
- Automotive sensors
- Portable electronic products powered by batteries
- Power control
- Addition operation circuits
- Video computer boards
- High gain DC amplifier
- ECG equipment
