TL064CNSR
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 30mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL064 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 1mA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 75.56dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 15mV |
| Input Offset Current-Max (IIO) | 0.0002μA |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
TL064CNSR Overview
There is a 14-SOIC (0.209, 5.30mm Width) case in which the instrumentation amplifier is packaged. This is a J-FET type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 14 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . You can run this op amp ic on 200μA . 75.56dB should be the voltage gain. In total, there are 4 circuits on this buffer amplifier. The linear amplifier is packaged by using a TR axis.
TL064CNSR Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064CNSR Applications
There are a lot of Texas Instruments TL064CNSR Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Professional videography
- Medical instruments
- E-book readers
- earphone
- Fission chambers
- Micro signal measurement
- Computer workstations
- Video conversion and routing
- Laptop
