TL071CD

1 Channels 40mA per Channel 20pA 70 dB Instrumentational OP Amps 0.02μA 6V~36V ±3V~18V TL071 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TL071CD
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 710
Description: 1 Channels 40mA per Channel 20pA 70 dB Instrumentational OP Amps 0.02μA 6V~36V ±3V~18V TL071 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	TL071
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Operating Supply Current	1.4mA
Nominal Supply Current	2.5mA
Power Dissipation	680mW
Output Current	40mA
Slew Rate	16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	6V~36V ±3V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	10mV
Bandwidth	4MHz
Rise Time	100ns
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4000 kHz
Voltage Gain	106.02dB
Average Bias Current-Max (IIB)	0.02μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	3mV
Low-Bias	YES
Bias Current-Max (IIB) @25C	0.0002μA
Height	1.25mm
Length	4.9mm
Width	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL071CD Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a J-FET-type. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 10mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Operational amplifier can operate supply current at 1.4mA. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it.