banner_page

TL074ACDRE4

65pA 75 dB Instrumentational OP Amps 0.007μA 18V ±5V~15V TL074 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL074ACDRE4
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 725
  • Description: 65pA 75 dB Instrumentational OP Amps 0.007μA 18V ±5V~15V TL074 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.007μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 3mV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.0002μA
Programmable Power NO
Nominal Gain Bandwidth Product 3MHz
Max I/O Voltage 6mV
Power NO
Input Offset Current-Max (IIO) 0.002μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Base Part Number TL074
Pin Count 14
Operating Supply Voltage 18V
Number of Elements 4
Power Supplies +-15V
Operating Supply Current 1.4mA
Nominal Supply Current 10mA
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 75 dB
Current - Input Bias 65pA
Voltage - Supply, Single/Dual (±) ±5V~15V
Input Offset Voltage (Vos) 6mV
Bandwidth 3MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3000 kHz

TL074ACDRE4 Overview


In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a J-FET-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 6mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 1.4mA . The voltage gain should stay at 106.02dB. A voltage rating of 4 is indicated for the op amp's operating supply voltage. The operating supply voltage of the buffer op amp is rated at 18V. As a result of this, the buffer amplifier is packed in TR.

TL074ACDRE4 Features


14 Pins
supply voltage of 15V
106.02dB voltage gain

TL074ACDRE4 Applications


There are a lot of Texas Instruments TL074ACDRE4 Instrumentational OP Amps applications.

  • Industrial control system
  • PDA
  • Wireless base stations
  • Blood pressure sensors
  • Medical instruments
  • Vehicle electronics
  • single/dual op amp sum and difference circuits
  • Computer workstations
  • Radar
  • Polarized electrodes

Write a review

Note: HTML is not translated!
    Bad           Good