TL074CNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL074 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 10mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 65pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.01μA |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL074CNSR Overview
Packaged in a 14-SOIC (0.209, 5.30mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called J-FET-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 14. It consists of a total of 14 pins in total. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are located on the operational amplifiers. Op amp rates 10mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 1.4mA. The voltage gain should stay at 106.02dB. It is possible to count 4 elements on this buffer amplifier. This linear amplifier pack is based on the TR axis.
TL074CNSR Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL074CNSR Applications
There are a lot of Texas Instruments TL074CNSR Instrumentational OP Amps applications.
- Power generator
- Non-polarized electrodes
- Industrial applications including automation
- Semiconductor detectors
- Tablets
- Vehicle electronics
- Exponential operation circuits
- Band-pass filter
- Image computer boards
- Hand-held batteries
