Parameters |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
65pA |
Voltage - Supply, Single/Dual (±) |
±5V~15V |
Input Offset Voltage (Vos) |
10mV |
Bandwidth |
3MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
3mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
10mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.01μA |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Base Part Number |
TL074 |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Number of Elements |
4 |
Power Supplies |
+-15V |
Operating Supply Current |
1.4mA |
Nominal Supply Current |
10mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
TL074CPWRG4 Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. Buffer amps of this type are called J-FET-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 14. In total, there are 14 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . The voltage gain should stay at 106.02dB. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TR-shape according to the design.
TL074CPWRG4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL074CPWRG4 Applications
There are a lot of Texas Instruments TL074CPWRG4 Instrumentational OP Amps applications.
- Fission chambers
- Displayers for aircraft and air transportation control systems
- Addition operation circuits
- Signal amplification
- Test equipment
- Power control
- Medical imaging
- Active probe
- Home audio systems
- Integrator circuits