Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Base Part Number |
TL074 |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Number of Elements |
4 |
Power Supplies |
+-15V |
Operating Supply Current |
1.4mA |
Nominal Supply Current |
10mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
65pA |
Voltage - Supply, Single/Dual (±) |
7V~36V ±3.5V~18V |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
9mV |
Wideband |
NO |
Power |
NO |
Input Offset Current-Max (IIO) |
0.002μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TL074QDREP Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. A J-FET-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 3mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 1.4mA supply current, this operational amplifier ics can be operated. 106.02dB should be the voltage gain. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TR-shape according to the design.
TL074QDREP Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL074QDREP Applications
There are a lot of Texas Instruments TL074QDREP Instrumentational OP Amps applications.
- Communication
- earphone
- Measurements of Wheatstone bridge
- Radar
- Differentiator circuits
- Band-stop filter
- Inverse/same-phase proportional circuit
- Active probe
- Power generator
- Video amplifiers