TL081ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL081 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 2.8mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL081ACP Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp ic of the J-FET type. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 6mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. Using an 1.4mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 106.02dB's 106.02dB family. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 18V.
TL081ACP Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL081ACP Applications
There are a lot of Texas Instruments TL081ACP Instrumentational OP Amps applications.
- Digital cameras
- Logarithmic operation circuits
- Instrumentation
- Medical imaging
- Radiation thermometry transducers
- ECG equipment
- Navigation
- High gain DC amplifier
- Cinema or auditorium audio system
- High speed sample
