TL081BCPE4
| Parameters | |
|---|---|
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 2.8mA |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 200pA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Micropower | NO |
TL081BCPE4 Overview
The linear amplifier is packaged in a PDIP case which makes it easy for the consumer to handle. An op amp of this type is a OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Op amp rates 3mV as input offset voltage. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Maintain 106.02dB as the voltage gain. For this linear amplifier to work, the temperature should not be below 0°C. You should only use op amp buffer at temperatures that are no higher than 70°C. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Conduct linear amplifier under the dual suuply voltage of 18V.
TL081BCPE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL081BCPE4 Applications
There are a lot of Texas Instruments TL081BCPE4 Instrumentational OP Amps applications.
- Automation control systems
- Cinema or auditorium audio system
- Non-polarized electrodes
- Multiplication circuits
- Home audio systems
- Communication
- Video computer boards
- Industrial control system
- Weighing systems
- Integrator circuits
