banner_page

TL082ACDRG4

30pA 75 dB Instrumentational OP Amps 0.007μA 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL082ACDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 672
  • Description: 30pA 75 dB Instrumentational OP Amps 0.007μA 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number TL082
Pin Count 8
Operating Supply Voltage 18V
Number of Elements 2
Power Supplies +-15V
Operating Supply Current 1.4mA
Nominal Supply Current 5.6mA
Power Dissipation 680mW
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 75 dB
Current - Input Bias 30pA
Voltage - Supply, Single/Dual (±) 7V~36V ±3.5V~18V
Input Offset Voltage (Vos) 6mV
Bandwidth 3MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3000 kHz
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.007μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 3mV
Low-Bias YES
Micropower NO
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 3MHz
Max I/O Voltage 6mV
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TL082ACDRG4 Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a J-FET-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. The input offset voltage is 6mV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 1.4mA . 106.02dB should remain the voltage gain. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted.

TL082ACDRG4 Features


8 Pins
supply voltage of 15V
106.02dB voltage gain

TL082ACDRG4 Applications


There are a lot of Texas Instruments TL082ACDRG4 Instrumentational OP Amps applications.

  • Signal amplification
  • Medical imaging
  • Semiconductor detectors
  • Home audio systems
  • Professional videography
  • Communication
  • single/dual op amp sum and difference circuits
  • Radiation thermometry transducers
  • Image computer boards
  • Gaming industry

Write a review

Note: HTML is not translated!
    Bad           Good