TL082BCDE4
| Parameters | |
|---|---|
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 3.5V |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 3mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 5.6mA |
| Power Dissipation | 680mW |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 200pA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
TL082BCDE4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. This is a OPERATIONAL AMPLIFIER type op amp. In the case of Rail/Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 3mV. It is possible to operate this buffer amplifier from a supply current of 1.4mA . 106.02dB should be the voltage gain. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. Use op amp only at temperatures no higher than 70°C. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 18V. Conduct linear amplifier under the dual suuply voltage of 18V.
TL082BCDE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082BCDE4 Applications
There are a lot of Texas Instruments TL082BCDE4 Instrumentational OP Amps applications.
- Ultrasound transducers
- Automotive sensors
- Multiplication circuits
- pH (acidity)
- Band-stop filter
- Band-pass filter
- Professional videography
- PDA
- RF cable systems
- Addition operation circuits
