TL082BCP

2 Channels 30pA 75 dB Instrumentational OP Amps 0.007μA 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TL082BCP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 223
Description: 2 Channels 30pA 75 dB Instrumentational OP Amps 0.007μA 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	15V
Base Part Number	TL082
Pin Count	8
Operating Supply Voltage	18V
Power Supplies	+-15V
Number of Channels	2
Operating Supply Current	1.4mA
Nominal Supply Current	5.6mA
Slew Rate	13V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	75 dB
Current - Input Bias	30pA
Voltage - Supply, Single/Dual (±)	7V~36V ±3.5V~18V
Input Offset Voltage (Vos)	3mV
Bandwidth	3MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	3000 kHz
Voltage Gain	106.02dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2mV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	3mV
Power	NO
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active

TL082BCP Overview

There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 3mV as input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1.4mA . You should keep the voltage gain at 106.02dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 18V.