TL082CM/NOPB
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL082 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 17mA |
| Max Supply Current | 5.6mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Settling Time | 2 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 15mV |
| Input Offset Current-Max (IIO) | 0.004μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | BI-FET II™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
TL082CM/NOPB Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A J-FET-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 15mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 3.6mA . The voltage gain should stay at 100dB. 2 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 18V. Instrumentation amplifiers are numbered by their BI-FET II? series.
TL082CM/NOPB Features
8 Pins
supply voltage of 15V
100dB voltage gain
TL082CM/NOPB Applications
There are a lot of Texas Instruments TL082CM/NOPB Instrumentational OP Amps applications.
- Exponential operation circuits
- Computer workstations
- Logarithmic operation circuits
- Signal filtering
- Semiconductor detectors
- Fast A/D and D/A converters
- Mobile phone
- Measurements of Wheatstone bridge
- Tablets
- Non-polarized electrodes
