Parameters |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
50pA |
Voltage - Supply, Single/Dual (±) |
10V~30V ±5V~18V |
Input Offset Voltage (Vos) |
15mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.0004μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
5mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.0004μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
4MHz |
Max I/O Voltage |
15mV |
Wideband |
NO |
Input Offset Current-Max (IIO) |
0.004μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Series |
BI-FET II™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Base Part Number |
TL082 |
Pin Count |
8 |
Operating Supply Voltage |
18V |
Number of Elements |
2 |
Power Supplies |
+-15V |
Operating Supply Current |
3.6mA |
Nominal Supply Current |
3.6mA |
Output Current |
17mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
TL082CMX/NOPB Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. This is a J-FET type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 15mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThis op amp can operate from a supply current at 3.6mA. Voltage gain should remain at 100dB. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps. Instrumentation amplifiers are numbered by their BI-FET II? series.
TL082CMX/NOPB Features
8 Pins
supply voltage of 15V
100dB voltage gain
TL082CMX/NOPB Applications
There are a lot of Texas Instruments TL082CMX/NOPB Instrumentational OP Amps applications.
- Multimedia playback equipment
- Commercial audio systems
- Power control
- Home audio systems
- Instrumentation
- Video computer boards
- Band-pass filter
- pH (acidity)
- Test equipment
- Power transmission