TL082CP/NOPB
| Parameters | |
|---|---|
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL082 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 17mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 3.6mA |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 4MHz |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 15mV |
| Input Offset Current-Max (IIO) | 0.004μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
TL082CP/NOPB Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 15mV as input offset voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. An 3.6mA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 100dB is the best course of action. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
TL082CP/NOPB Features
8 Pins
supply voltage of 15V
100dB voltage gain
TL082CP/NOPB Applications
There are a lot of Texas Instruments TL082CP/NOPB Instrumentational OP Amps applications.
- Addition operation circuits
- Wireless base stations
- Radar
- Exponential operation circuits
- Ultrasound transducers
- Home audio systems
- Communication
- Signal amplification
- earphone
- Precision measurement
