TL082CPWE4
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 8 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 400pA |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 15mV |
| Length | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
TL082CPWE4 Overview
There is a TSSOP case package that contains the instrumentation amplifiers. An op amp ic of the OPERATIONAL AMPLIFIER type. A Rail/Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 15mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Keeping the voltage gain at 106.02dB is the best course of action. There are 2 circuits on this op amp. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. No temperature greater than 85°C should be used. The operating supply voltage of the buffer op amp is rated at 18V. It is recommended that you conduct this electronic part using the dual supply voltage of 18V.
TL082CPWE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082CPWE4 Applications
There are a lot of Texas Instruments TL082CPWE4 Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Power control
- Polarized electrodes
- Communication device
- Medical imaging
- Professional videography
- Commercial audio systems
- Division circuits
- Test and measurement instruments
