Parameters |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Base Part Number |
TL082 |
Pin Count |
8 |
Operating Supply Voltage |
18V |
Number of Elements |
2 |
Power Supplies |
+-15V |
Operating Supply Current |
1.4mA |
Nominal Supply Current |
5.6mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
30pA |
Voltage - Supply, Single/Dual (±) |
7V~36V ±3.5V~18V |
Input Offset Voltage (Vos) |
15mV |
Bandwidth |
3MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.01μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
3mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.0004μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
15mV |
Power |
NO |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
TL082CPWRG4 Overview
In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. J-FET-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 15mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using an 1.4mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 106.02dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 18V. It is used TR to pack the op amps.
TL082CPWRG4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082CPWRG4 Applications
There are a lot of Texas Instruments TL082CPWRG4 Instrumentational OP Amps applications.
- MP3
- Car stereo
- E-book readers
- Radar
- Switching amplifier
- Image computer boards
- Active probe
- ECG equipment
- pH (acidity)
- Proportional counter tubes