banner_page

TL082IDRG4

30pA 75 dB Instrumentational OP Amps 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL082IDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 274
  • Description: 30pA 75 dB Instrumentational OP Amps 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number TL082
Pin Count 8
Operating Supply Voltage 18V
Number of Elements 2
Power Supplies +-15V
Operating Supply Current 1.4mA
Nominal Supply Current 5.6mA
Power Dissipation 680mW
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 75 dB
Current - Input Bias 30pA
Voltage - Supply, Single/Dual (±) 7V~36V ±3.5V~18V
Input Offset Voltage (Vos) 6mV
Bandwidth 3MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3000 kHz
Voltage Gain 106.02dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 3mV
Low-Bias YES
Micropower NO
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 3MHz
Max I/O Voltage 6mV
Input Offset Current-Max (IIO) 0.01μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TL082IDRG4 Overview


It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. J-FET-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 6mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 1.4mA. Op amp is a member of the 106.02dB's 106.02dB family. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted.

TL082IDRG4 Features


8 Pins
supply voltage of 15V
106.02dB voltage gain

TL082IDRG4 Applications


There are a lot of Texas Instruments TL082IDRG4 Instrumentational OP Amps applications.

  • earphone
  • Radar
  • Non-polarized electrodes
  • Test equipment
  • Test and measurement instruments
  • Thermocouples
  • Oscilloscopes
  • Tablets
  • High speed sample
  • Communication

Write a review

Note: HTML is not translated!
    Bad           Good