TL082IDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL082 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL082IDRQ1 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Voltage gain should remain at 106.02dB. On this instrumentation amplifier, there are 2 circuits that are connected together. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The linear amplifier is packaged by using a TR axis. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100.
TL082IDRQ1 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082IDRQ1 Applications
There are a lot of Texas Instruments TL082IDRQ1 Instrumentational OP Amps applications.
- High gain DC amplifier
- Differentiator circuits
- Signal transformation
- High-frequency data acquisition systems
- Navigation
- Test equipment
- Image computer boards
- Instrumentation
- Professional videography
- Non-polarized electrodes
