TL082IDT

2 Channels 40mA per Channel 20pA 80 dB Instrumentational OP Amps 18V 6V~36V ±3V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TL082IDT
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 972
Description: 2 Channels 40mA per Channel 20pA 80 dB Instrumentational OP Amps 18V 6V~36V ±3V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~105°C
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Max Power Dissipation	680mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	TL082
Pin Count	8
Operating Supply Voltage	18V
Power Supplies	+-15V
Number of Channels	2
Operating Supply Current	1.4mA
Nominal Supply Current	2.5mA
Power Dissipation	680mW
Output Current	40mA
Slew Rate	16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	80 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	6V~36V ±3V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	10mV
Bandwidth	4MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4000 kHz
Voltage Gain	106.02dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	3mV
Low-Bias	YES
Input Offset Current-Max (IIO)	0.004μA
Height	1.25mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL082IDT Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are J-FET types of amplifier on the chip. The op amp is delivered to you in a Cut Tape (CT) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. Op amp rates 10mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. There should be no change in the voltage gain. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TAPE AND REEL axis.