TL084CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | TL084 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Channels | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 680mW |
| Output Current | 40mA |
| Min Input Voltage | -12V |
| Slew Rate | 16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Max Input Voltage | 15V |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL084CN Description
:
The TL084CN is a JFET input operating amplifier with operational amplifiers that uses less power. High slew rates, low input bias and offset currents, and a low offset voltage temperature coefficient distinguish the TL084CN. The JFET architecture was adopted for less input bias and offset current because of the huge value of impedance inputs. It runs on a voltage range of seven to thirty-six volts and can be powered by two separate power sources. It's mostly used in amplifier circuits. Voltage comparator filters and voltage-controlled oscillators are two of its most prevalent uses. Has the ability to handle frequencies in the three to four megahertz range. The TL084CN is a quad packing operational amplifier, which means it has four operational amplifiers in it. Its most notable characteristic is its ability to work with high-voltage JFET configurations. Because of the preamplifier's design, there is less noise and harmonic distortion.
TL084CN Features
:
■ Wide common-mode (up to Vcc+) and differential voltage range
■ Low input bias and offset current
■ Output short-circuit protection
■ High input impedance JFET input stage
■ Internal frequency compensation
■ Latch up free operation
■ High slew rate: 16V/μs (typ)
TL084CN Applications
:
Buffer circuits
Amplifier Circuits
Audio pre-amplification
Audio/noise filter circuits
Multistage Voltage generators
Circuit requiring high input impedance
:
The TL084CN is a JFET input operating amplifier with operational amplifiers that uses less power. High slew rates, low input bias and offset currents, and a low offset voltage temperature coefficient distinguish the TL084CN. The JFET architecture was adopted for less input bias and offset current because of the huge value of impedance inputs. It runs on a voltage range of seven to thirty-six volts and can be powered by two separate power sources. It's mostly used in amplifier circuits. Voltage comparator filters and voltage-controlled oscillators are two of its most prevalent uses. Has the ability to handle frequencies in the three to four megahertz range. The TL084CN is a quad packing operational amplifier, which means it has four operational amplifiers in it. Its most notable characteristic is its ability to work with high-voltage JFET configurations. Because of the preamplifier's design, there is less noise and harmonic distortion.
TL084CN Features
:
■ Wide common-mode (up to Vcc+) and differential voltage range
■ Low input bias and offset current
■ Output short-circuit protection
■ High input impedance JFET input stage
■ Internal frequency compensation
■ Latch up free operation
■ High slew rate: 16V/μs (typ)
TL084CN Applications
:
Buffer circuits
Amplifier Circuits
Audio pre-amplification
Audio/noise filter circuits
Multistage Voltage generators
Circuit requiring high input impedance
