TL084IN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | TL084 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 680mW |
| Output Current | 40mA |
| Slew Rate | 16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 9V |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL084IN Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . A supply current of 1.4mA can be used to operate this linear amplifier. 106.02dB should remain the voltage gain. There are 4 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V.
TL084IN Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL084IN Applications
There are a lot of STMicroelectronics TL084IN Instrumentational OP Amps applications.
- Multimedia playback equipment
- MP3
- Communication
- Polarized electrodes
- Video data acquisition
- Proportional operation circuits
- Band-pass filter
- Radiation thermometry transducers
- Division circuits
- Differentiator circuits
