TL084INE4
| Parameters | |
|---|---|
| Input Offset Current-Max (IIO) | 0.01μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 11.2mA |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 200pA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
TL084INE4 Overview
In the package, you will find a PDIP-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Rail/Tube case. There is a growing number of terminations approaching the number of 14. The total number of pins on linear amplifier is 14. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 14 pins on this chip. Regarding input offset voltage, buffer amplifier rates 6mV voltage. The buffer amplifier is capable of operating from a supply current of 1.4mA . You should keep the voltage gain at 106.02dB for the time being. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. At temperatures greater than 125°C, Instrumentation amplifier should not be used. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.
TL084INE4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL084INE4 Applications
There are a lot of Texas Instruments TL084INE4 Instrumentational OP Amps applications.
- High input resistance broadband
- Medical imaging
- Micro signal measurement
- Video computer boards
- High-frequency data acquisition systems
- Power control
- Scintillation detectors
- Automotive sensors
- Voltage regulation circuit
- Communication
