TL1451ACDBR

16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL1451ACDBR
Package: 16-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 430
Description: 16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	16
Weight	128.593437mg
Operating Temperature	-20°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	6V
Terminal Pitch	0.65mm
Frequency	500kHz
Base Part Number	TL1451
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	50V
Input Voltage-Nom	6V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	3A
Voltage - Supply (Vcc/Vdd)	3.6V~50V
Quiescent Current	1.7mA
Control Features	Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~500kHz
Max Input Voltage	50V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Dropout Voltage	200mV
Min Output Voltage	1V
Switcher Configuration	PHASE-SHIFT
Duty Cycle	100 %
Output Phases	1
Height	2mm
Length	6.2mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL1451ACDBR Overview

It comes in the 16-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Cut Tape (CT) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.6V~50V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -20°C~85°C TA rating. In this switching controller, the switch can be set to 1kHz~500kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL1451". In total, switching converter has 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. A frequency of 500kHz is used by the switching controller. It is suggested that users apply 50V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switchings that are dormant use 1.7mA. The maximum input voltage of dc switcher is 50V, so users should limit their voltage accordingly. Switching controller is necessary to supply a voltage of 6V. Voltage 3.6V is necessary for the supply. There will be 3A current output from the dc switcher above 3A. The switching converter can output 50V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 1V.