TL1451ACDG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Max Output Current | 3A |
| Operating Supply Voltage | 50V |
| Input Voltage-Nom | 6V |
| Temperature Grade | OTHER |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Current - Output | 3A |
| Quiescent Current | 1.7mA |
| Frequency (Max) | 500kHz |
| Max Output Voltage | 50V |
| Voltage - Output | 50V |
| Topology | Flyback, Boost |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 50V |
| Control Technique | PULSE WIDTH MODULATION |
| Dropout Voltage | 200mV |
| Min Output Voltage | 1V |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 100 % |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL1451ACDG4 Overview
It comes in the SOIC package, which makes switching controller suitable for most applications. For 2 outputs, the dc motor controller is appropriate. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 6V nominal DC switcher's voltage input. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 2.5V voltage of DC regulator was detected in the test statistics. When running the voltage regulator dc to dc in a circuit, users should apply 50V to ensure safety and reliability. You should keep dc regulator at -20°C degrees or higher. At a temperature around 85°C degrees Celsius, dc regulator should be running. In total, thare switch converters have 1 functions. In a dormant state, the dc switching uses 1.7mA. Voltage regulators switching is designed with 16 pins. Maximum frequency of the controller is 500kHz. The dc switcher's maximum input voltage is 50V; users must limit it accordingly. With 3A inputs, switching controller is ideal. As a result of normalworking processes, a voltage of 50V is output. In order to use a 3.6V voltage supply, switching controller is necessary to have one. Output current will not exceed 3A. At its maximum, the switching converter can output 50V volts. Its lowest voltage output is not less than 1V.
TL1451ACDG4 Features
PULSE WIDTH MODULATION
TL1451ACDG4 Applications
There are a lot of Texas Instruments TL1451ACDG4 DC to DC converter applications.
- Balance equipment
- Arc suppression circuits
- Imported equipment
- Scientific testing
- Grinders
- Industrial controllers
- Geothermal power
- Laboratories
- Medical monitoring systems
- Plate bending machines
