TL1451ACDRG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Max Output Current | 3A |
| Operating Supply Voltage | 50V |
| Input Voltage-Nom | 6V |
| Temperature Grade | OTHER |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Current - Output | 3A |
| Quiescent Current | 1.7mA |
| Frequency (Max) | 500kHz |
| Max Output Voltage | 50V |
| Voltage - Output | 50V |
| Topology | Flyback, Boost |
| Min Input Voltage | 3.6V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 50V |
| Control Technique | PULSE WIDTH MODULATION |
| Dropout Voltage | 200mV |
| Min Output Voltage | 1V |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 100 % |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TL1451ACDRG4 Overview
With its SOIC package, the switching controller fits the needs of most applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. There are only 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 2.5V voltage. A circuit should contain 50V in order to ensure the voltage regulator dc to dc runs safely and reliably. Temperatures should be kept at -20°C or higher. A temperature of 85°C degrees Celsius is recommended. The switch converters have 1 function (s) in total. In dormant mode, 1.7mA is used. It is designed to have voltage regulators switchings with 16 pins. Maximum frequency of the controller is 500kHz. In order to limit the voltage of a dc switcher whose maximum input voltage is 50V, it must be limited by the user. With 3A input, it is ideal for switching controllers. This process outputs a value of 50V for normalworking processes. A voltage of 3.6V is required for the supply. DC switcher will not be able to provide an output current above 3A volts. The datasheet indicates that the switching converter can output 50V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 1V.
TL1451ACDRG4 Features
PULSE WIDTH MODULATION
TL1451ACDRG4 Applications
There are a lot of Texas Instruments TL1451ACDRG4 DC to DC converter applications.
- seismic instrument power circuits
- USB circuits
- Bending machines
- Large fire protection systems
- Nuclear power plants
- Electrical distribution systems
- Computer monitoring equipment of building
- Direct power supply system
- PSRR circuits
- Machining centers
