TL1451ACNS
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TL1451 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 50V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.6V~50V |
| Quiescent Current | 1.7mA |
| Control Features | Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
TL1451ACNS Overview
With a 16-SOIC (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs can be generated with the dc motor controller. A solid enclosure of Tube surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 3.6V~50V voltage are supplied and operated. Suitable for working in an dc switcher that has a -20°C~85°C TA. In this switching controller, the switch can be set to 1kHz~500kHz. dc dc regulator can be generalized using Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of 16 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL1451". Switching converter has a total of 16 pins. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3.6V. Statistically, DC regulator outputs 50V volts. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The max frequency of the pmic can reach 500kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 50V. Dormant dc switchings use 1.7mA.
TL1451ACNS Features
Transistor Driver Outputs
Switching Frequency: 1kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
TL1451ACNS Applications
There are a lot of Texas Instruments TL1451ACNS DC to DC converter applications.
- Digital video recorders
- Bending machines
- Die casting equipment
- Handheld GPS
- Access control systems
- Thermal power
- Refrigerators of central air conditioners
- Power supplies of electronic gadgets
- Flaw detection equipment
- Gear/thread machining machines
