TL1451ACPW

16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL1451ACPW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 308
Description: 16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-20°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	6V
Base Part Number	TL1451
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	50V
Input Voltage-Nom	6V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	10mA
Voltage - Supply (Vcc/Vdd)	3.6V~50V
Quiescent Current	1.7mA
Control Features	Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~500kHz
Max Input Voltage	50V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Dropout Voltage	200mV
Min Output Voltage	1V
Switcher Configuration	PHASE-SHIFT
Max Frequency	500kHz
Duty Cycle	100 %
Output Phases	1
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL1451ACPW Overview

With a 16-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). 3.6V~50V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. In this switching controller, the switch can be set to 1kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 6V. TL1451 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 16. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 50V. You should note that the dc dc regulator's usual output current is 10mA. DC regulator's maximum frequency is 500kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 50V to the voltage regulator dc to dc. Dormant dc switchings use 1.7mA. The maximum input voltage of this dc switcher is 50V, so users must limit the voltage accordingly. There must be a voltage supply of 6V volts. A voltage of 3.6V is required for the supply. DC switcher will not be able to provide an output current above 3A volts. The switching converter can output 50V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 1V.