TL1451AQDR

16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL1451AQDR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 757
Description: 16 Terminals 3.6V~50V 16-Pin TL1451 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 1kHz~500kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	148.409754mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	6V
Base Part Number	TL1451
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	50V
Input Voltage-Nom	6V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	3A
Voltage - Supply (Vcc/Vdd)	3.6V~50V
Quiescent Current	1.7mA
Control Features	Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~500kHz
Max Input Voltage	50V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Dropout Voltage	200mV
Min Output Voltage	1V
Switcher Configuration	PHASE-SHIFT
Max Frequency	500kHz
Duty Cycle	100 %
Output Phases	1
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL1451AQDR Overview

It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 3.6V~50V. Worked in a -40°C~125°C TJ dc switcher before. Switching can be done at 1kHz~500kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. TL1451 can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 50V voltage. If you start a project, note down the dc dc regulator's usual output current of 3A. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 50V. Dormant dc switchings use 1.7mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 50V due to the dc switcher's maximum input voltage. The supply voltage must be 6V. A voltage of 3.6V is required for the supply. Output current will not exceed 3A. The datasheet indicates that the switching converter can output 50V volts at its maximum. Lowest voltage output of the voltage controller must be greater than 1V.