TL1453CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Frequency | 500kHz |
| Base Part Number | TL1453 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | PWM |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1453CN Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. There is a Tube solid enclosure around the pmic. The program can handle PWM dc switching's outputs (s). dc controls with 3.6V~40V voltage are supplied and operated. Worked in a -20°C~85°C TA dc switcher before. This switching controller can switch at 1kHz~500kHz. As it has a Through Hole value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL1453". There are only 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3.6V. DC regulator outputs 50V voltage according to the test statistics. The dc dc regulator's usual output current is 700mA, which should be noted down when you start a project. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sThere is 500kHz frequency setting on the switching controller. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. The switch converters have 2 function (s) in total. It is planned to design voltage regulators switchings with 16 pins.
TL1453CN Features
PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
TL1453CN Applications
There are a lot of Texas Instruments TL1453CN DC to DC converter applications.
- Laboratories
- Various precision measuring detectors
- Elevator lighting
- Flaw detection equipment
- Precision electronic equipment
- Mobile phones
- Medical equipment
- Computer monitoring equipment of building
- Automatic testing equipment
- Low output voltage switching power supply circuits
