TL1453CNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TL1453 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | PWM |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1453CNSR Overview
With its 16-SOIC (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling PWM dc switching's outputs (s). DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Qualified to work in a -20°C~85°C TA dc switcher. It can switch at 1kHz~500kHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. Search for "TL1453" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3.6V. According to the test statistics, DC regulator outputs 50V voltage. In most cases, the output current of the dc dc regulator will be 20mA, so note that when you start the project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 40V. Total number of functions (s) for thare switch converters are 1. Designing voltage regulators switchings with 16 pins.
TL1453CNSR Features
PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL1453CNSR Applications
There are a lot of Texas Instruments TL1453CNSR DC to DC converter applications.
- Hydraulic presses
- Textile machinery
- Television equipment
- Wind power
- Sink circuits
- Automatic testing equipment
- Plate bending machines
- Product testing
- Laboratories
- Constant current circuits
