TL1453CNSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TL1453 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | PWM |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1453CNSRG4 Overview
Capsuled in the 16-SOIC (0.209, 5.30mm Width) package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle PWM dc switching's outputs (s). The supply and operating voltage of the dc control are 3.6V~40V. Suitable for working in an dc switcher that has a -20°C~85°C TA. This switching controller can switch at 1kHz~500kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 16. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 6V. Searching "TL1453" will return other relevant dc to dc converter ics. 16 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 3.6V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 50V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20mA. DC switcher's Surface Mount qualifies it for most applications and prototypes. 500kHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. 1 functions are available in total for the switch converters. A voltage regulators switching with 16 pins is designed.
TL1453CNSRG4 Features
PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL1453CNSRG4 Applications
There are a lot of Texas Instruments TL1453CNSRG4 DC to DC converter applications.
- ATMs
- Cutting machine tools
- CMM
- Combined machine tools
- Overvoltage protection circuits in TV sets
- Scientific testing
- Window air conditioners
- Experimental setup
- Correction machines
- Laboratories
