TL1453CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | TL1453 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | PWM |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1453CPWR Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. PWM dc switching's outputs (s) are supported. DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Qualified to work in an dc switcher with -20°C~85°C TA. There is a switch at 1kHz~500kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 6V. Other relevant dc to dc converter ics will be returned if you search "TL1453". 16 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3.6V. As determined by the test statistics, the output voltage of DC regulator is 50V. normally, the dc dc regulator's output current is 20mA, which you should keep in mind when starting a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator500kHz has the maximum frequency. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 40V. In total, the switch converters have 2 function (s). Designing voltage regulators switchings with 16 pins.
TL1453CPWR Features
PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL1453CPWR Applications
There are a lot of Texas Instruments TL1453CPWR DC to DC converter applications.
- Automatic plug-in machines
- Solar power plants
- CNC system
- Bending machines
- Digital precision reference circuits
- Electrical distribution systems
- Refrigerators of central air conditioners
- Magnetohydrodynamic power
- Flaw detection equipment
- Terrestrial set-top boxes
