TL1453CPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | TL1453 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 50V |
| Output Type | PWM |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~40V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1453CPWRG4 Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With PWM dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 3.6V~40V. Qualified to work in an dc switcher with -20°C~85°C TA. There is a switch at 1kHz~500kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 6V. TL1453 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter is a special type of Switching Regulator or Controllers. 3.6V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 50V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. This dc regulatorhas a max frequency of 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. In total, the switch converters have 2 function (s). It is planned to design voltage regulators switchings with 16 pins.
TL1453CPWRG4 Features
PWM Outputs
Switching Frequency: 1kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
TL1453CPWRG4 Applications
There are a lot of Texas Instruments TL1453CPWRG4 DC to DC converter applications.
- Planers
- Computer rooms
- Machining centers
- Elevator lighting
- Industrial controllers
- Packaging
- Various precision measuring detectors
- Digital display device
- Handheld GPS
- Textile machinery
