TL1454ACDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | TL1454 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 40mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~20V |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL1454ACDBR Overview
Capsuled in the 16-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. For 2 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Cut Tape (CT). With this function, you can deal with Transistor Driver dc switching's outputs (s). 3.6V~20V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -20°C~85°C TA. A switching controller such as this can switch at a value of 50kHz~2MHz . dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 16 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 6V. Other relevant dc to dc converter ics will be returned if you search "TL1454". Total pins of switching converter are 16. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 3.6V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 20V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 40mA. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is 2MHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 20V.
TL1454ACDBR Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 2MHz
TL1454ACDBR Applications
There are a lot of Texas Instruments TL1454ACDBR DC to DC converter applications.
- Telecommunications equipment
- Refrigerators of central air conditioners
- Current source circuits
- Product burn-in
- Mobile phones
- Alternators
- Production lines
- Grinders
- Emergency lighting monitoring equipment
- Electrical power transmission
