TL16C2550IRHBR
| Parameters | |
|---|---|
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TL16C2550 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
TL16C2550IRHBR Overview
There is a cost-effective 32-VFQFN Exposed Pad package available for this product.In order to transmit data, there are 2, DUART channels available.Tape & Reel (TR) is adopted for packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 32 terminations.In order for it to operate, a voltage of 5V must be provided.The status of this electronic part is currently Active.In order to communicate data, there are 2 serial I/Os.Mounting is possible through Surface Mount.UART operates wUARTh the supply voltage of 1.8V~5V.UART is a type of 32-pin integrated circuUART.There is 24MHz clock frequency measured on this IC.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.To maintain normal work for a long time, the operating temperature should not exceed 85°C.A configuration of the chip is determined by its 32 pins.Several characteristics of Internal Oscillator are present in it.The way of mounting it is Surface Mount.UART operates at 5V voltage to maintain high efficiency.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ.As a base part number, it is specified as TL16C2550.There is a maximum value for supply current that is 1.5mA.
TL16C2550IRHBR Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550IRHBR Applications
There are a lot of Texas Instruments TL16C2550IRHBR UARTs applications.
- Wireless Portable Point-of-Sale Terminals
- Infrared Transceivers
- Handheld Terminals and Tablets
- Factory Automation and Process Controls
- Cellular data devices
- Battery Operated Electronics
- Factory automation and process control
- Remote Access Servers
- Universal PCI Bus Add-in Card
- Telecommunication Network Routers
