TL16C2550PFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| HTS Code | 8542.33.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C2550 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Memory Size | 16B |
| Operating Supply Current | 7.5mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2550PFB Overview
The 48-TQFP package is the most cost-effective.The transmission is conducted over 2, DUART channels.In terms of packaging, Tray is used.Its uPs/uCs/Peripheral ICs type is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 48 terminations is used.In order to operate it, a supply voltage of 5V is required.At present, this electronic part is in the state of Active.Data communication is handled by 2 serial I/Os.You can mount it by using Surface Mount.This device operates at 1.8V~5V.There are 48 pins on this electronic device.There is a 24MHz clock frequency for this IC.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 85°C.The 48 pins form the basis for its configuration.A few characteristics of Internal Oscillator can be found in it.The mount is done using Surface Mount.To ensure high efficiency, it operates at 5V supply voltage.In addition, it has the capability of performing ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ.There is a default setting for the base part number of the part to be TL16C2550.Supply currents up to 1.5mA are allowed.An application-specific supply current of 7.5mA is used for its operation.There is 16B of memory that holds various pieces of information.
TL16C2550PFB Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550PFB Applications
There are a lot of Texas Instruments TL16C2550PFB UARTs applications.
- Gaming Terminals
- Network Management
- Wireless Infrared Data Communications Systems
- Multimedia Systems
- Ethernet Network Routers
- Serial to Parallel/Parallel to Serial Converter
- Portable Applications
- Industrial computing
- Universal PCI Bus Add-in Card
- Point-of-Sale Systems
