TL16C2550RHBR
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TL16C2550 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1mm |
TL16C2550RHBR Overview
The 32-VFQFN Exposed Pad package is the most cost-effective.UART is possible to transmUART on 2, DUART channels.As for packaging, Tape & Reel (TR) is chosen.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 32 terminations are used.For its operation, a voltage of 5V is provided as the supply voltage.Currently, this electronic part is Active.As a means of transferring data, there are 2 serial I/Os.You can mount it by using Surface Mount.There is a voltage supply of 0 volts for the device.An 32-pin integrated circuit is what this particular device is.This IC measures its clock frequency at 24MHz.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.To ensure long-term operation, the operating temperature should not exceed -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The 32 pins are at the core of the device's configuration.Several characteristics of Internal Oscillator can be observed in it.The mount is done using Surface Mount.In order for the device to operate efficiently, 5V is the supply voltage.Furthermore, it has the ability to perform ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ as well.Basically, it uses TL16C2550 as its base part number.The supply current of 1.5mA is an allowable maximum value.
TL16C2550RHBR Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550RHBR Applications
There are a lot of Texas Instruments TL16C2550RHBR UARTs applications.
- Cellular Data
- Telecommunication Network Routers
- Handheld Terminal
- Personal Digital Assistants Modules
- DTE for Modem Communication Systems
- Portable and battery operated devices
- Router C ontrol
- Communications equipment
- Battery Operated Instruments
- Personal Digital Assistants
