TL16C2552FN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.33.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2552 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2552FN Overview
In addition, it is available in the cost-effective package 44-LCC (J-Lead).Transmission is carried out over 2, DUART channels.When UART comes to packaging, Tube is adopted as the packaging method.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.In its configuration, 44 terminations are used.The device operates at 5V voltage.This electronic part is Active at present.There are 2 serial I/Os working as a way for data communication.You can mount it by using Surface Mount.In order for it to operate, a voltage of 1.8V~5V must be applied.An IC with 44 pins is what this device is.IC clock frequency is set to 24MHz.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.The 44 pins are at the core of the device's configuration.There are some characteristics of Internal Oscillator that are present in it.A mounting method of Surface Mount is used.Its high-efficiency operation relies on a voltage of 5V.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.A base part number of 16C2552 is used for this product.1.5mA is the maximum value of the supply current.
TL16C2552FN Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C2552FN Applications
There are a lot of Texas Instruments TL16C2552FN UARTs applications.
- Communications equipment
- Portable Applications
- GPS Devices
- Cellular data devices
- Ethernet Network to Serial Ports
- Portable and battery operated devices
- Serial to Parallel/Parallel to Serial Converter
- Point-of-Sale Systems
- Telecommunication Network Routers
- Cellular Phones DataPort
