TL16C2552IFNR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2552 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tape & Reel (TR) |
TL16C2552IFNR Overview
In order to make it more cost-effective, this product is also available in a package of 44-LCC (J-Lead).Transmissions are made using 2, DUART channels.Tape & Reel (TR) is used in terms of packaging.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.The configuration uses 44 terminations.For its operation, a voltage of 5V is provided as the supply voltage.In the present state, this electronic part is Active.As a way to communicate data, the board has 2 serial I/Os.Mounting is possible through Surface Mount.UART operates on a voltage of 1.8V~5V.This electronic device belongs to the 44-pin IC family.Its clock frequency is measured at 24MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.It is important to keep the operating temperature below 85°C to ensure a long working period.The configuration relies on the 44 pins.UART possesses some characteristics of Internal Oscillator.Surface Mount is the method used to mount it.In order to achieve high efficiency, it is provided with the supply voltage of 5V.Furthermore, ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY can also be performed.Basically, it uses 16C2552 as its base part number.Supply currents up to 1.5mA are allowed.
TL16C2552IFNR Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C2552IFNR Applications
There are a lot of Texas Instruments TL16C2552IFNR UARTs applications.
- Infrared Transceivers
- Portable and battery operated devices
- Domestic Applications
- GPS Devices
- Handheld Terminals and Tablets
- Factory Automation and Process Controls
- Network Management
- Cellular Phones DataPort
- Multimedia Systems
- White goods
