TL16C2752FN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2752 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Memory Size | 64B |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2752FN Overview
The 44-LCC (J-Lead) package is the most cost-effective.UART is possible to transmUART on 2, DUART channels.In terms of packaging, Tube is adopted.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 44 terminations is used.UART operates on 5V supply voltage.At present, this electronic part has a status of Active.There are 2 serial I/Os working as a way for data communication.Mounting is done through Surface Mount.There is a voltage supply of 0 volts for the device.An 44-pin integrated circuit is what this particular device is.In this IC, the clock frequency is 48MHz.This item is classified as Serial IO/Communication Controllers due to a number of similarities.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.The configuration relies on the 44 pins.There are some characteristics of Internal Oscillator that are present in it.Surface Mount is the method used to mount it.Its high-efficiency operation depends on a supply voltage of 5V.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.Basically, it uses 16C2752 as its base part number.With a memory size of 64B, various information is stored.
TL16C2752FN Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C2752FN Applications
There are a lot of Texas Instruments TL16C2752FN UARTs applications.
- Point-of-Sale Systems
- Remote Access Servers
- Domestic Applications
- Factory Automation and Process Controls
- Network Management
- Personal Digital Assistants Modules
- Multimedia Systems
- Cellular data devices
- Cellular Data
- Handheld Terminals and Tablets
