TL16C2752IFNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2752 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Address Bus Width | 3 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2752IFNR Overview
There is a cost-effective package 44-LCC (J-Lead) available.Transmission is carried out over 2, DUART channels.As far as packaging is concerned, Tape & Reel (TR) is used.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 44 terminations is used.For its operation, a voltage of 5V is provided as the supply voltage.The status of this electronic part is currently Obsolete.Data communication is handled by 2 serial I/Os.A method of mounting it is through Surface Mount.This device operates with a supply voltage of 1.8V~5V.This electronic device belongs to the 44-pin IC family.IC clock frequency is set to 48MHz.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.Ideally, the operating temperature should not exceed -40°C in order to ensure long-term performance.The operating temperature should be in excess of 85°C to ensure the normal work for a long time.The configuration of this device is based on the 44 pins.The object possesses some characteristics that are similar to Internal Oscillator.The mounting method is Surface Mount.In order to achieve high efficiency, it is provided with the supply voltage of 5V.Additionally, it is also able to perform ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY and other operations as well.16C2752 is used as its base part number.
TL16C2752IFNR Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C2752IFNR Applications
There are a lot of Texas Instruments TL16C2752IFNR UARTs applications.
- Telecommunication Network Routers
- Portable Applications
- Cellular Data
- Battery Operated Electronics
- Cellular Phones DataPort
- DTE for Modem Communication Systems
- Router C ontrol
- Industrial computing
- Factory automation and process control
- Multimedia Systems
