TL16C450FN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 3.072MHz |
| Base Part Number | TL16C450 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Data Rate | 256 kbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.03125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With False Start Bit Detection | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C450FN Overview
Alternatively, UART can be purchased in the cost-effective 44-LCC (J-Lead) package.The transmission is conducted over 1, UART channels.As for packaging, Tube is chosen.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.A configuration of 44 terminations is used.This device is powered by a voltage of 5V.The status of this electronic part is currently Active.Data communication is supported by 1 serial I/Os.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 4.75V~5.25V must be applied.This device is an integrated circuit with 44 pins.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.To ensure long-term operation, the operating temperature should not exceed 0°C.To maintain normal work for a long time, the operating temperature should not exceed 70°C.In its configuration, it is designed around the 44 pins.The mounting method is Surface Mount.In the case of 5V power supplies, it is reliable and efficient to use by electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.Its base part number is TL16C450.Supply currents up to 10mA are allowed.
TL16C450FN Features
1 serial I/Os
Power supplies of 5V
Operating supply voltage of 5V
TL16C450FN Applications
There are a lot of Texas Instruments TL16C450FN UARTs applications.
- Handheld Terminals and Tablets
- Serial to Parallel/Parallel to Serial Converter
- Telecommunication Network Routers
- Gaming Terminals
- Network Management
- Ethernet Network to Serial Ports
- Industrial computing
- Domestic Applications
- Handheld Terminal
- Portable Applications
