TL16C450FNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C450 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 3.072MHz |
| Data Rate | 256 kbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.03125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With False Start Bit Detection | Yes |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C450FNR Overview
UART is available in the cost-effective 44-LCC (J-Lead) package.Transmission is carried out over 1, UART channels.Tape & Reel (TR) is used in terms of packaging.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 44 terminations are used.This device is powered by a voltage of 5V.At present, this electronic part is in the state of Active.As a way to communicate data, the board has 1 serial I/Os.Mounting is done through Surface Mount.During operation, the supply voltage is set to 4.75V~5.25V.The electronic device is a type of integrated circuit with a pin count of 44.There is a 3.072MHz clock frequency for this IC.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.UART is important that the operating temperature does not exceed 0°C in order for the machine to perform normally for a long time.The operating temperature should be in excess of 70°C to ensure the normal work for a long time.The configuration relies on the 44 pins.Using Surface Mount, it is mounted.Providing power supplies of 5V makes it reliable and efficient for electronic designers.UART operates at a high efficiency due to the voltage supply of 5V.TL16C450 is used as its base part number.10mA is the maximum value of the supply current.
TL16C450FNR Features
1 serial I/Os
Clock frequency of 3.072MHz
Power supplies of 5V
Operating supply voltage of 5V
TL16C450FNR Applications
There are a lot of Texas Instruments TL16C450FNR UARTs applications.
- Domestic Applications
- Battery Operated Electronics
- DTE for Modem Communication Systems
- Factory automation and process control
- Cellular Phones DataPort
- Industrial computing
- Cellular data devices
- Point-of-Sale Systems
- GPS Systems
- Multimedia Systems
