TL16C451FN
| Parameters | |
|---|---|
| Number of Serial I/Os | 1 |
| Bus Compatibility | IBM PC-AT |
| Data Transfer Rate-Max | 0.03125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Modem Control | Yes |
| Height | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Printer Port |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CENTRONIX PRINTER INTERFACE |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | MOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C451 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 5.71MHz |
| Data Rate | 256 kbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
TL16C451FN Overview
There is a cost-effective 68-LCC (J-Lead) package available for this product.Transmission is carried out over 1, UART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.The configuration uses 68 terminations.This device is powered by a voltage of 5V.At present, this electronic part has a status of Active.Data is communicated via 1 serial I/Os.Mounting is done through Surface Mount.This device operates with a supply voltage of 4.75V~5.25V.An IC with 68 pins is what this device is.This IC operates at a clock frequency of 5.71MHz.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.UART is recommended that the operating temperature does not exceed 0°C to ensure long-term, normal performance.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 70°C.A configuration of the chip is determined by its 68 pins.UART possesses some characteristics of Printer Port.The device is mounted in accordance with Surface Mount.Providing power supplies of 5V makes it reliable and efficient for electronic designers.In order to achieve high efficiency, it is provided with the supply voltage of 5V.Furthermore, it is also capable of CENTRONIX PRINTER INTERFACE.As a base part number, it is specified as TL16C451.In this case, 10mA represents the maximum supply current that can be used.There are 8 I/Os designed to transfer data.
TL16C451FN Features
1 serial I/Os
Clock frequency of 5.71MHz
Power supplies of 5V
Operating supply voltage of 5V
CENTRONIX PRINTER INTERFACE
8 I/Os
TL16C451FN Applications
There are a lot of Texas Instruments TL16C451FN UARTs applications.
- Factory automation and process control
- Handheld Terminal
- Battery Operated Electronics
- Remote Access Servers
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Telecommunication Network Routers
- White goods
- Router C ontrol
- Factory Automation and Process Controls
- Wireless Infrared Data Communications Systems
