TL16C452FNG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Printer Port |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CENTRONIX PRINTER INTERFACE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C452 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Data Rate | 256 kbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | IBM PC-AT |
| Data Transfer Rate-Max | 0.03125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C452FNG4 Overview
Alternatively, UART can be purchased in the cost-effective 68-LCC (J-Lead) package.Transmission is carried out over 2, DUART channels.Packaging is based on Tube.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.Configured with 68 terminations.To operate it, 5V is provided as the supply voltage.Currently, this electronic part is Obsolete.As a way to communicate data, the board has 2 serial I/Os.A method of mounting it is through Surface Mount.4.75V~5.25V supply voltage is required to operate it.An IC with 68 pins is what this device is.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.Ideally, the operating temperature should not exceed 0°C in order to ensure long-term performance.The operating temperature should be in excess of 70°C to ensure the normal work for a long time.Initially, it will be configured with 68 pins.UART possesses some characteristics of Printer Port.UART is mounted in the way of Surface Mount.With power supplies of 5V, electronic designers can use it reliably and efficiently.In order for the device to operate efficiently, 5V is the supply voltage.In addition, it has the capability of performing CENTRONIX PRINTER INTERFACE.There is a default setting for the base part number of the part to be TL16C452.10mA is the maximum allowable supply current.
TL16C452FNG4 Features
2 serial I/Os
Power supplies of 5V
Operating supply voltage of 5V
CENTRONIX PRINTER INTERFACE
TL16C452FNG4 Applications
There are a lot of Texas Instruments TL16C452FNG4 UARTs applications.
- Remote Access Servers
- Network Management
- Router C ontrol
- Wireless Infrared Data Communications Systems
- Factory Automation and Process Controls
- Factory Automation
- Wireless Portable Point-of-Sale Terminals
- Portable Appliances
- GPS Systems
- Portable and battery operated devices
